HIV antibody tests are specifically designed for routine diagnostic testing of adults; these tests are inexpensive and extremely accurate.
Window period
Antibody tests may give false negative (no antibodies were detected despite the presence of HIV) results during the window period, an interval of three weeks to six months between the time of HIV infection and the production of measurable antibodies to HIV seroconversion. Most people develop detectable antibodies approximately 30 days after infection, although some seroconvert later. The vast majority of people (97%) have detectable antibodies by three months after HIV infection; a six-month window is extremely rare with modern antibody testing. During the window period, an infected person can transmit HIV to others although their HIV infection may not be detectable with an antibody test. Antiretroviral therapy during the window period can delay the formation of antibodies and extend the window period beyond 12 months. This was not the case with patients that underwent treatment with post exposure prophylaxis (PEP). Those patients must take ELISA tests at various intervals after the usual 28 day course of treatment, sometimes extending outside of the conservative window period of 6 months. Antibody tests may also yield false negative results in patients with X-linked agammaglobulinemia; other diagnostic tests should be used in such patients.
Three instances of delayed HIV seroconversion occurring in health-care workers have been reported; in these instances, the health-care workers tested negative for HIV antibodies greater than 6 months postexposure but were seropositive within 12 months after the exposure. DNA sequencing confirmed the source of infection in one instance. Two of the delayed seroconversions were associated with simultaneous exposure to hepatitis C virus (HCV). In one case, co-infection was associated with a rapidly fatal HCV disease course; however, it is not known whether HCV directly influences the risk for or course of HIV infection or is a marker for other exposure-related factors.
ELISA
The enzyme-linked immunosorbent assay (ELISA), or enzyme immunoassay (EIA), was the first screening test commonly employed for HIV. It has a high sensitivity.
In an ELISA test, a person's serum is diluted 400-fold and applied to a plate to which HIV antigens have been attached. If antibodies to HIV are present in the serum, they may bind to these HIV antigens. The plate is then washed to remove all other components of the serum. A specially prepared "secondary antibody" — an antibody that binds to human antibodies — is then applied to the plate, followed by another wash. This secondary antibody is chemically linked in advance to an enzyme. Thus the plate will contain enzyme in proportion to the amount of secondary antibody bound to the plate. A substrate for the enzyme is applied, and catalysis by the enzyme leads to a change in color or fluorescence. ELISA results are reported as a number; the most controversial aspect of this test is determining the "cut-off" point between a positive and negative result.
Western Blot
Like the ELISA procedure, the western blot is an antibody detection test. However, unlike the ELISA method, the viral proteins are separated first and immobilized. In subsequent steps, the binding of serum antibodies to specific HIV proteins is visualized.
Specifically, cells that may be HIV-infected are opened and the proteins within are placed into a slab of gel, to which an electrical current is applied. Different proteins will move with different velocities in this field, depending on their size, while their electrical charge is leveled by a surfactant called sodium lauryl sulfate. Some commercially prepared Western blot test kits contain the HIV proteins already on a cellulose acetate strip. Once the proteins are well-separated, they are transferred to a membrane and the procedure continues similar to an ELISA: the person's diluted serum is applied to the membrane and antibodies in the serum may attach to some of the HIV proteins. Antibodies that do not attach are washed away, and enzyme-linked antibodies with the capability to attach to the person's antibodies determine to which HIV proteins the person has antibodies.
There are no universal criteria for interpreting the western blot test: The number of viral bands that must be present may vary. If no viral bands are detected, the result is negative. If at least one viral band for each of the GAG, POL, and ENV gene-product groups are present, the result is positive. The three-gene-product approach to western blot interpretation has not been adopted for public health or clinical practice. Tests in which less than the required number of viral bands are detected are reported as indeterminate: a person who has an indeterminate result should be retested, as later tests may be more conclusive. Almost all HIV-infected persons with indeterminate western blot results will develop a positive result when tested in one month; persistently indeterminate results over a period of six months suggests the results are not due to HIV infection. In a generally healthy low-risk population, indeterminate results on western blot occur on the order of 1 in 5,000 patients. However for those individuals that have had high-risk exposures to individuals where HIV-2 is most prevalent, Western Africa, an inconclusive western blot test may prove infection with HIV-2.
The HIV proteins used in western blotting can be produced by recombinant DNA in a technique called recombinant immunoblot assay (RIBA).
Rapid or point-of-care tests
Rapid antibody tests are qualitative immunoassays intended for use as a point-of-care test to aid in the diagnosis of HIV infection. These tests should be used in conjunction with the clinical status, history, and risk factors of the person being tested. The positive predictive value of Rapid Antibody Tests in low-risk populations has not been evaluated. These tests should be used in appropriate multi-test algorithms designed for statistical validation of rapid HIV test results.
If no antibodies to HIV are detected, this does not mean the person has not been infected with HIV. It may take several months after HIV infection for the antibody response to reach detectable levels, during which time rapid testing for antibodies to HIV will not be indicative of true infection status. For most people, HIV antibodies reach a detectable level after two to six weeks.
Although these tests have high specificity, false positives do occur. Any positive test result should be confirmed by a lab using the western blot.
Home Access Express HIV-1 Test is the only FDA-approved home test: the patient collects a few blood drops from a fingerstick, and mails the sample to a laboratory; results and counseling are obtained over the phone. All results are anonymous and confirmed before they are released.
OraQuick is an antibody test that provides results in 20 minutes. The blood, plasma or oral fluid is mixed in a vial with developing solution, and the results are read from a sticklike testing device. Usually detects HIV 1 and HIV 2.
Orasure is an HIV test that uses mucosal transudate from the tissues of cheeks and gums. It is an antibody test that first employs ELISA, then western blot.
Uni-Gold is a rapid HIV antibody test that provides results in 10–12 minutes. A drop of blood is placed on the device with developing solution. Uni-Gold is only FDA approved to test for HIV 1.
Clearview Complete HIV 1/2 and Clearview HIV 1/2 Stat-Pak are rapid tests for the detection of HIV 1 and HIV 2 antibodies in blood, serum, or plasma samples. Results are provided within 15 minutes.
There is also a urine test; it employs both the ELISA and the western blot techniques.
iDiagnostics Rapid HIV Test is, according only to their website, a non-FDA-approved home test. The company sells a blood test and a urine test produced by InTec PRODUCTS, INC. Similar to a home pregnancy test the patient collects a drop of blood/urine and drops the sample onto a cassette. Results are read visually in 15 minutes. The accuracy of this test has not been confirmed by the FDA, and it is not authorized for sale in the United States.
The INSTI HIV-1/HIV-2* Rapid Antibody Test is a rapid in vitro qualitative test for the detection of antibodies to Human Immunodeficiency Virus Type 1 in human whole blood, serum or plasma. The test is intended for use by trained personnel in medical facilities, clinical laboratories, emergency care situations, and physicians' offices as a screening assay capable of providing test results in less than 60 seconds. The assay is packaged as a kit containing INSTI Membrane Units, Sample Diluent, Color Developer and Clarifying Solution, and is available in point-of-care use packaging, or packaging suitable for laboratory use.
Reveal HIV is a rapid in vitro qualitative test for the detection of antibodies to HIV in whole blood, serum or plasma. Reveal is among the fastest rapid HIV test available and it detects signs of early infection better than some other rapid tests. Reveal HIV is approved in Canada, the United States, Europe, Africa, Asia, and South America.
Interpreting antibody tests
ELISA testing alone cannot be used to diagnose HIV, even if the test suggests a high probability that antibody to HIV-1 is present. In the United States, such ELISA results are not reported as "positive" unless confirmed by a Western Blot.
The ELISA antibody tests were developed to provide a high level of confidence that donated blood was NOT infected with HIV. It is therefore not possible to conclude that blood rejected for transfusion because of a positive ELISA antibody test is in fact infected with HIV. Sometimes, retesting the donor in several months will produce a negative ELISA antibody test. This is why a confirmatory Western Blot is always used before reporting a "positive" HIV test result.
Rare false positive results due to factors unrelated to HIV exposure are found more often with the ELISA test than with the Western Blot. False positives may be associated with medical conditions such as recent acute illnesses and allergies. A rash of false positive tests in the fall of 1991 was initially blamed on the influenza vaccines used during that flu season, but further investigation traced the cross-reactivity to several relatively non-specific test kits. A false positive result does not indicate a condition of significant risk to health. When the ELISA test is combined with Western Blot, the rate of false positives is extremely low, and diagnostic accuracy is very high.
HIV antibody tests are highly sensitive, meaning they react preferentially with HIV antibodies, but not all positive or inconclusive HIV ELISA tests mean the person is infected by HIV. Risk history, and clinical judgement should be included in the assessment, and a confirmation test (Western blot) should be administered. An individual with an inconclusive test should be re-tested at a later date.
Accuracy of HIV testing
Modern HIV testing is highly accurate. The evidence regarding the risks and benefits of HIV screening was reviewed in July 2005 by the U.S. Preventive Services Task Force. The authors concluded that:
...the use of repeatedly reactive enzyme immunoassay followed by confirmatory Western blot or immunofluorescent assay remains the standard method for diagnosing HIV-1 infection. A large study of HIV testing in 752 U.S. laboratories reported a sensitivity of 99.7% and specificity of 98.5% for enzyme immunoassay, and studies in U.S. blood donors reported specificities of 99.8% and greater than 99.99%. With confirmatory Western blot, the chance of a false-positive identification in a low-prevalence setting is about 1 in 250 000 (95% CI, 1 in 173 000 to 1 in 379 000).
The specificity rate given here for the inexpensive enzyme immunoassay screening tests indicates that, in 1,000 HIV test results, about 15 of these results will be a false positive. Confirming the test result (i.e., by repeating the test, if this option is available) could reduce the ultimate likelihood of a false positive to about 1 result in 250,000 tests given. The sensitivity rating, likewise, indicates that, in 1,000 negative HIV test results, 3 will actually be a false negative result. However, based upon the HIV prevalence rates at most testing centers within the United States, the negative predictive value of these tests is extremely high, meaning that a negative test result will be correct more than 9,997 times in 10,000 (99.97% of the time). The very high negative predictive value of these tests is why the CDC recommends that a negative test result be considered conclusive evidence that an individual does not have HIV.
Of course, the actual numbers vary depending on the testing population. This is because interpreting of the results of any medical test (assuming no test is 100% accurate) depends upon the initial degree of belief, or the prior probability that an individual has, or does not have a disease. Generally the prior probability is estimated using the prevalence of a disease within a population or at a given testing location. The positive predictive value and negative predictive value of all tests, including HIV tests, take into account the prior probability of having a disease along with the accuracy of the testing method to determine a new degree of belief that an individual has or does not have a disease (also known as the posterior probability). The chance that a positive test accurately indicates an HIV infection increases as the prevalence or rate of HIV infection increases in the population. Conversely, the negative predictive value will decrease as the HIV prevalence rises. Thus a positive test in a high-risk population, such as people who frequently engage in unprotected anal intercourse with unknown partners, is more likely to correctly represent HIV infection than a positive test in a very low-risk population, such as unpaid blood donors.
Many studies have confirmed the accuracy of current methods of HIV testing in the United States, reporting false-positive rates of 0.0004 to 0.0007 and false-negative rates of 0.003 in the general population.